lmao_37

Hi and welcome :thumb:

I got the stock from Boyd's gun stocks its a walnut stock, it needed a little fine tuning for my receiver and a little light sanding and i fully floated the barrel and then 8 coats of satin finish varnish and rubbed down with wire wool, it has come up really good and thank you :thumb:

Good to hear it finally the gremlin has kicked the bucket :thumb:

I have been looking on the internet for rifle ranges that are longer than 200 yards most are 100 yards and i can't find one anyone got any idea's on where i could look.

I know its not a .22 and not tactical but as you see i have been busy with my mosin project ;D the stock has been varnished with 8 coats of satin finish varnish and has had some inletting done so the bolt will close all the way and the scope mount base is now fitted it took a little time to drill and tap the receiver and mount the scope i now cant wait to go to the range and try it out :grin: the target photo was from Tuesday i fired 60 rounds and this was the second target i shot the Rifle was shooting to the right so i had to use Kentucky windage to hit now it has a scope on it i cant wait to try it at 200 yards ;D

Hi and welcome :thumb: You don't need a .22 Walther living there you need a Desert Eagle .50 to keep those dam Spanish out or for shooting dam pebble monkeys ;D

I've seen this at Brownells has anyone tried it? http://www.brownells.com/.aspx/pid=41610/Product/GUN_KOTE_trade__OVEN_CURE__GUN_FINISH

Do you really need to be spending anymore time in your gun safe ? :laugh:

I now have all the bits to finish my mosin project, the only thing i might do is refinish the rifle i just don't know which route to go i haven't ever parkerized a thing in my life but it does need something doing it has 90% of the bluing but it is scuffed around the muzzle looks like someone fitted the bayonet at some point any ideas guys :confused:.

I found this and i thought i would share ;D

Looks great :thumb:

Hi and welcome :thumb:

What i have read iam going to need a 1mm pitch thread which is another odd sized die >:(

Does anyone have a 14mm x 1mm left hand die for cutting a screw thread please ?

Hi there :thumb:

Dang you rob a bank :o

Sounds like a plan to me :thumb:

Ive been using only Federal in my gsg AK i my wife brought me 200 rounds of cci minimag for Christmas plus the box she brought me before i now have 300 rounds of cci and a federal 550 box, iam going to be going to the range Monday to shoot my Mosin in its standard config but while iam there ill also shoot cci and federal with my AK and post how they compare in that.

Sounds like a good place to shoot i might have to bring my Mosin over (if you let me :o ) in the spring (once i have finished the project) and try out your 1000 yrd range ;D it would be good to have a shoot with someone off of this site :thumb:

Hi and welcome, there is no known cure for you addiction :grin: Except by more :thumb:

Hi there :thumb:

Hi and welcome sounds like a nice prodject time to go to the workshop.

:laugh: Thats funny

They really take collecting mosins seriously some try and collect every year and model that they were made ??? i think they need to get a life instead of more guns :o

:laugh: thats funny