cashxx

Do you have that spring in place in the front? Is the spring in that big firing pin plate? That strut isn't getting stuck or anything is it? I'm in the middle of doing these mods as well and had the same issue the other day, but forget what it was now. Well actually I am still kinda having it, hard to kinda test without firing. While the trigger assembly is out of the lower I would test it then. That is what I am doing. Make sure you have the hammer filed correctly as well. But if I hold the trigger back and push the hammer back it locks up and I have to push the trigger forward. But not sure if it did that before, am I pushing the hammer back too far? Sucks I live in the city and hard to mod/test/shoot! I'm messing with that firing pin plate right now. Trying to weld that that rear hole to make it smaller so there is no play in the trigger. Had it perfect and then filed too much and screwed it all up. Have to redo it now tomorrow. **Update** I just temporarily put my lower in and its working fine with everything together. So with mine I must be pushing the hammer back to far while my trigger is still pulled in while testing with just the trigger assembly. I can't duplicate it when everything is together. So I would still have a look and make sure those springs are in place and check the hammer if you filed it down.