pragan14 Posted December 29, 2012 Report Share Posted December 29, 2012 Hello All, I just bought the HK 416 .22 and tried putting on a Magpul ACS stock, it fits and everything but theres alot more play than i would prefer, does anybody know if the 416's take replacement buffer tubes so i can get one that fits Magpul stocks better? Thanks, PJ Quote Link to comment Share on other sites More sharing options...
techmike Posted December 30, 2012 Report Share Posted December 30, 2012 Welcome to Tac 22. I do not have the H&K, but my Colt M4 had the same issue. I used a self-adhesive teflon tape - sticky on one side, black & smooth on the other side, - it is about .020" thick. I stacked a few pieces of that inside the stock, at 0900, 1200 & 1500, and my after market AR stock works fine with no slop. Quote Link to comment Share on other sites More sharing options...
pragan14 Posted January 5, 2013 Author Report Share Posted January 5, 2013 Thank you, i tried it with black duct tape and it works pretty well Quote Link to comment Share on other sites More sharing options...
techmike Posted January 5, 2013 Report Share Posted January 5, 2013 OK, But I would not count on the duct tape to be a long-term solution. The adhesive on all duct tape will migrate out the edges eventually... If you are interested I can point you towards higher quality tape. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.