jco69

well ended up selling that 522sd, but got another a couple weeks and here's how it looks so far :-)

It started out as a wally world special stainless deluxe sporter with the 22" barrel, i added the archangel556 kit hydrodipped in reaper skulls, the scope is a BSA SWEET 22 6x18x40. i also added the auto bolt plate, ext charging handle with Ruger logo from customruger1022s.com, ext mag realease from rimfire technologies.

all done :-)

Thanks guys, now I need it to get nice out so I can shoot

i got a deal :-) but check him out www.stricklandhydrographics.com

Its Hydro dipped in reaper skulls :-)

ok, now im done :-)

The riser is on, i actually needed it, it was too low and you had to cock your head kind of weird to see through. with the riser, its perfect :-)

Anybody have a tan archangel kit that would want to trade stock and fore end? looking to do a two tone on mine and id rather not have to paint.

Here's mine

Like the way it turned out, still waiting on the ext. charging handle and the scope riser.

Roughly 1500 rounds through it comes with 2 22rnd mags, illuminated(blue) 3x9x42 scope, full length top rail, Magpul AFG2. $425

back from Duracoat, had a problem with the handgaurd so it's going back to black.got therail and afg mounted, i just need to send back the black one and get one in FDE. [img width=800 height=600]http://i740.photobucket.com/albums/xx44/jco69/100_3550-2.jpg

Just got this , sweet :-)

Just bought a Magpul AFG2 and a 5" rail, now i just need my parts back from Duracoat so i can grind on it to fit the rail :-(

I sent my stock, trigger housing, and hand guard out to be duracoated Magpul FDE :-)

does anybody have one for GSG 522? I have one from the MP5 conversion kit if you would be interested in trading. i also have the rest of the conversion kit if anybody id interested.

great shape $25 OBO

New scope :-)

$30 OBO SHIPPED

1.strip the mags completely down 2. feel along the channels where the follower slides up and down and you will prob feel high spots in the channel 3. i started with 150 grit sand paper, then 400 wet, then finished with 2000 and sand the curvature of the channel until ALL the high spots have gone. 4.Also sand the long slots which run up the center of the 2half's of the mag(where the thumb grips runs) 5.Also sand the follower you should be able to hold the two half's of the mag together and the follower should just fall out with no resistance. 6. Assemble the mag and put the follower in, now put the 2 little follower grips in with Allen bolts but don't tighten them too much as this can cause friction.Next check it slides up and down freely. 7. Resemble the rest of the mag.

Update, sanded both mags a little more and bought a 550 pack of Federal, not a single problem out of 10 mags :-) good bye Winchester!

Update on Winchester 555, i took my mags apart and sanded them and went and shot some more rounds from the 555 pack. i had significantly less problems this time! using the factory 22 rnd mag i only had 6 FTF(fire) out of 7 mags compared to 6 per mag(i still dont like winchester). using the Pro mag i got alot of FTF's (5-6 per mag) which is still better than before, i think i still need to sand a little more as it was still a little sticky in spots and i could still see some high spots after i sanded. next time out i'm going to see what happens after sanding some more and i'm going to buy some Federal and see how that does. I will update when i find out more.

I've had nothing but bad results with Winchester in general in my GSG. with 555 packs, some rounds dont even fit in the chamber, some dont fire, or get jammed. today i bought Winchester super x super speed thinking the extra FPS would help, i was wrong! again i got rounds that didnt fit, several light strikes and jams. i also bought some stingers, no light strikes, all the rounds fit(100) and 2 jams but i think they were mag related. so no more winchesters for me :-)

expensive is right! but it is pretty cool :-)