rabies

paypal or pickup. moline il pm me plz its dark grey. oversprayed with rubber coating. cleaned and ready to ship. $25shpd

very cool. hope you like it. my .02 after 10,000rds the best way to clean it is seperate the receivers. hold the bolt back and push up the mag lock to lock the bolt back. hold the upper with barrel pointin up and spray silicone lube in teh chambering area like a mad man in it. alllll the residue and grime will come out. it will be very very dirty. unless you want to spend hours dissassembling it to get the bolt out. its designed much like an AEG airsoft gun. if you ever take it apart completely. it helps to super glue the nuts in the shell halves so you dont lose them

jus curious..how much you wana throw down on it

corner shot thing. angleshot tried a scope with a mini red dot sight from element. its too awkward.

really wish someone made aftermarket ones for us. and keep them under $30 no1 has ever really compared side by side the conversion or BD mags to the umarex mags. in the pictures though seems as though the umerax loading is farther back at least not that i have seen after weeks and weeks of googling and asking around. where is the cheapest place to get these umarex mags? iv seen them go for $50..re..dic..ulous

cant see the pic doc

here is the factory stock for sale. as you can see in the pic there is a small engraving "RR" below the "HK" logo. /i live in iowa. i use paypal and ship same day. $35shipd for all nothing broken, light scratches comes witht the factory grip and stock ring

^you should be the one to try some troy battle flip up sights :D heres my walther p22 supressor adapter. fits jus perfect. same threading. 1/2-28

for me i had to shave alittle on the very back of the guard and it fit right in

of course you would need an adapter from a walther p22 or tacticool and would then look funky....still..anyone dif flash hiders/ muzzle brakes?

i payd $600 total when it first came out. seems i can only find mags for $35 :/ what did you pay and if you find mags at lower prices post a link. gun shows are silly about them $40 for one.. i was like..uh..no thanx

thats alot of stuff or a .22. your stock is milspec. check the pic thread. i have a CTR stock(milspec size) and its fits nice. the commercial size is way to big and wont stay on(too big) the sling mount..yes it fits. the pistol grip however you might have to make fit with a dremel. if you get the airsoft version it not fit at all and look like crap. get the actualy magpul grip. its differnt where you bolt it on. dont be afraid to paint it. post pics. dont put useless stuff on it. have fun

i reallly couldnt help it... :-[ so i painted it A-tacs CLICK

i did bother. i ended up getting a silly airsoft version of the grip so it was the same like in your pic. im going to end up buying the actual magpul one. the rod effects nothing. so when i get the new one itl jus bolt on fine. first post was jus an FYI. not sure why but i always make things mor complicated :(

all done..i think magpul trigger guard CTR stock ASP sling dealy buis sights aimpoint T1 sight with 1" QD riser magpul grip afg2 stippled cheapy laser rubber ladder rail protectors cheapy extended latch that took some fitting. but is purdy nice

the barrel nut unscrews normally. its tuff. i used a screw driver and hammered it loose. im sure you can buy a longer barrel. buying from umarex is a joke though. im sure itl be at least $200 for the barrel. after you get the barrel nut off you have to press out the inner barrel.... remove the flash hider. remove the barrel nut. press off the outer barrel...i had to use a hammer :/ post #7 in my thread shows http://tactical22.net/forum/hk-416-d-22-tactical-rimfire/semi-catastrophic-failure/ if yuo have to hammer it off. mind you its soft alluumiumimn so use a rubber mallet. brace the barrel so you dont bend it. the inner barrel is inside the shroud... here not sure why and how his jus slid off with ease ;(

about 1" it is. then the barrel nut sqeezes the barrel down onto the receiver. however ... :/ ..... in the middle of the barrel there is a lump. and the barrel has to be pressed in and out of the sleeve. like an idiot i used a hammer to get it in and out. it took quit abit of force

$26 for these little parts >:( was self explainatory to reassemble with the new parts barrel made the whole job hard. hard to remove the barrel without hammering and damaging the soft aluminum put these on here it is all put back together i fired around 200rds yesterday out of it. seems to work jus fine. no failures besides the velocity spring needs wound up more.

ahh looks good. thanx for posting. i may have to make me one

i found taking out the velocity spring keeps the tension off it all when cleaning. you should post a pic of this "wedge" seems like a good idea so i dont keep taking out this spring

standard federal red box. i think it was from being real dirty, a round that possibly had a bent nose and it didnt fully close..thats my gues and it blew up outside the chamber. anything bigger of a caliber the whole gun would have been ruined..

not sure what its called.(pic is below) jus for FYI to anyone. i bought a mapgul grip. to make it fit i had to drill into it or cut the nub....i cut the trigger nub thing off, flush with the clam plates when the hammer is cocked back. and it works 100% still. i watched a youtube video on how to take the whole trigger assembly apart for a DYI trigger job and i can see where it would pay off to keep that nub on. but its only a spring follower it seems. but yes. after cut. it works 100% still

sure can. they are on ebay for under $20