Jump to content
Rimfire World Community
Visit Brownells Visit AR15 Builder Visit Visit Site Visit Ballistic Advantage Visit Aero Precision Visit Cabelas

Magpul Fixed Stock On My 15-22


S-10

Recommended Posts

Just put a Magpul fixed stock on the 15-22. Pretty easy to do. I put the stock fully on, Put a dab of white acrylic paint on the crossbar bolt as a marking template and placed it in the stock hole. If you do this let it dry a while or you will get a smear of paint on the tube when you take the stock off. Dimple the center of your paint spot as a pilot and drill through with a 1/16 drill then work your way up ti 1/4 inch until you get a nice semi circle cut out. Finish up with a 1/4 inch rat tail file to make sure the crossbar bolt connects to the attaching nut. Stock is now rock solid on the rifle. Found the stock a tad bit short but Magpul is sending me a butt plate enhancement which should lengthen it more. If you want one for your 15-22 make sure to get the military spec stock and not the commercial one. Got mine in black from Midway for about $30.00

post-2009-144124394478_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...