imschur

The magazines arrived. They look odd being slightly shorter than a typical 1911 magazine.

Well the extra long screw arrived today.... :grin:

trying to hit an elephant? ;D

Done!

Thanks Im going to order one now too

Did you order them direct?

sorry to hear that man. Keep your chin up

weve been lucky the last few days. The weather predictions have been way off and the rain has mostly missed us. Still showing rain every day though

:laugh: :ttiwop:

great! let us know how it shoots

we with those neighbors at the little womans. When they were out in the snow it looked like mashed potato's that just needed gravy

Interestingly my stock was shipped from Loveland, Colorado. stockysstocks list their address as Florida. Bell&Carlson is not in Colorado either. No matter, I will have my stock in hand next Monday

fantastic

My personal experience with the .17HMR has been one of the most accurate factory rounds at its intended range that I have put through a weapon. A pure joy to shoot.

Major System-Wide Outage Posted (April 30th, 2011 at 2:37 pm PST) by Josh We are investigating the cause and will update this post as soon as we know more. Update 2:54pm PST: One of our network providers is having issues right now. Our network admins are working on moving all traffic to our two other service providers. We will keep updating this post as soon as we have more information. -Oscar Update 3:10pm PST: We are having issues with one of our transit links to our LAX datacenter, our network administrators are investigating the issue and we hope to have it resolved as soon as humanly possible. This is causing problems with both external and internal networking – we’ll update this post as soon as we have more information or the issue is resolved. -John Update 3:30pm PST: Our network engineers are on site at the source of the issue and working on resolving it. More information to follow as it becomes available. -John Update 3:50pm PST: We are still working feverishly to resolve this issue – some portions of our network are responding better now but there’s more work to be done. -John Update 4:10pm PST: We are seeing improvement but are still working on this issue. -John Update 4:40pm PST: Our network engineers rebooted the core router at our LAX facilities but our providers are still flapping. It appears that the LAX facility may be stabilized but we’re experiencing high load on our core routers as a result of all the BGP flapping. We are still investigating the issue but current traffic patterns possibly indicate an attack on our network. -John Update 5:00pm PST: We are still working to defeat this attack on our network. Nullifying certain source IPs has seemed to help matters, but that attack vectors and profiles are still being introduced and identified. -John Update 5:25pm PST: Some attacks have been blocked that were inbound and we have identified some that were outbound and blocked those as well. We’re still working on the matter and the network responsiveness is improving but the attacks are still causing BGP flapping. -John Update 5:50pm PST: We’ve pinned down the sources and nature of the attacks and are in the process of scanning for more attack software as well as filtering bad traffic at the core routers. The issue is not completely resolved yet but we’re making good progress now. More updates to follow. -John Update 6:15pm PST: In a nutshell we suffered an extremely sophisticated attack. It took a while to get things under control enough to see what was going on and then start not only blocking attack vectors but track down and disable software being used to launch attacks from our network as well. Things are almost under control currently and once they are we’ll get a full and detailed report from our network engineers for you. -John Update 6:35pm PST: Good news – all inbound attacks appear to now be screened and the CPU levels on our networking equipment is currently stable. We’ve strengthened our defenses at all levels of our network as well – borders are hardened, cores are protected, transit interfaces are stable. That said, we’re remaining vigilant as these attacks are much more advanced than what we’ve seen previously. -John Update 6:50pm PST: All indications are that everything is under control so we are marking this matter as resolved. We will still provide details on what happened as soon as we’re able to do so. -John Update 7:12pm PST: It’s back.. we’re on it again.. more updates soon. -Josh Update 7:31pm PST: It seems that we’re seeing issues with our transit links to our Alchemy datacenter. Our network engineers are working on the issue and we will update this as soon as we have more information. – Oscar Update: 8:02pm PST: We are seeing some more interruptions in networking, our admins and network engineers are still looking into the issue. – Justin Update: 8:25pm PST: Our abuse team is getting involved as well at this point. We have resolved issues on most of our routers, and have found over 500 compromised sites so far, that we are working on fixing. Overall things should improve over time. -Justin Update: 8:53pm PST: Things once again seem to be resolved.. we’re going to be cautiously optimistic and say nobody should be seeing any network issues at this time. We’re still going through squashing bad guys here and there, but the system is now sound. We’ll update this post if anything changes. -Josh Update: 9:14pm PST: I spoke too soon again.. we’re still on it. -Josh Update 9:41pm PST: Okay, it seems like we were being attacked because of a site we host. We’re investigating, things should be mostly back to normal for nearly everybody but the attack continues.. -Josh

17HMR is such an accurate cartridge and at a much greater distance than .22lr. I would get a dot that had two sizes like the Millet DMS or even something like a Eotech (like my Avatar) even if not calibrated for the .17 it should be quite serviceable and the best of both worlds

The folks that host this server are experiencing a network attack at LAX. Its causing outages of the site(s)

Well the 45c is on my list ;D

oh I dont shoot it at work. My little woman lives down the street from where we work. We go home for lunch. I do get strange looks with my weekly deliveries of gun parts, high capacity magazines and ammo.

The first thing that caught my eye negatively was the way "Victor" was embossed or roll marked in to the weapon.

Thanks!! I wonder if they are made as well as the original. I would have a very high expectation

Welcome!

Their website shows them in production but I cant seem to locate anything for sale? I would love to get a Supermatic Trophy

whoa thats some serious trivia :thumb:

Update: I told the shop owner that when the owner of this pistol comes to his senses I will give him $75 less than the asking price. He said "The guys a dick and will probably never move" I can wait or buy an HK45 ;D