rodent.22 Posted June 19, 2010 Report Posted June 19, 2010 Well it has been 4 months since I shot the OD on my Colt furniture. The Krylon Fusion Camo spray cans have been as advertised. This stuff does bond VERY well. I have had some pencilpoint-sized chips on some edges. What I did was lightly scuff the affected area and clean the piece very good, then reshoot. The reshoots have not chipped again. This is after LOTS of shooting and handling. My new Smith and Wesson got the same scheme, so a matched set now is on hand. When cleaning do not allow Hoppes #9 on this paint as it will remove it....If you are fairly careful handling your guns, and careful with the chemicals I would recommend Krylon.
Microgunner Posted June 20, 2010 Report Posted June 20, 2010 Good to know. Thanks. PS. Rifles look good. :thumb:
HogMan Posted July 13, 2011 Report Posted July 13, 2011 I tried Krylon and it gets sticky the longer I grip it. I striped it off three times and the same thing happened. >:( :confused:
rodent.22 Posted July 17, 2011 Author Report Posted July 17, 2011 HogMan sorry to hear you are having difficulties, I haven't had the stickiness sensation.
imschur Posted July 17, 2011 Report Posted July 17, 2011 Wonder if it's a body chemistry thing. I knew a diabetic who's sweat would dissolve watches and such
Laketrash18 Posted November 4, 2021 Report Posted November 4, 2021 On 7/13/2011 at 11:48 AM, HogMan said: I tried Krylon and it gets sticky the longer I grip it. I striped it off three times and the same thing happened. 😠 😕 it is not curing. Let sit up longer
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now