New reloading bench

[asmurff]

Tomorrow I hope to start on my new reloading bench. With 2 progressive reloaders, a shotshell reloader, and RCBS case prep tools I've run out of working and storage space.

I bought the bench legs from "2x4 Basics" the top will be 4'l x 3'w  3'h, with two 16" x 4' shelves above the top and a 4' x 3' shelf below.

http://2x4basics.com/ look under Garage and Storage.

The area behind the top shelves will be enclosed with peg board, and the area below the table I'll enclose with 1/4" plywood.

[lmao_37]

Cool photos please as iam going to be building a reloading bench soon

[rodent.22]

this sounds good- post photos for sure! :thumb:

[asmurff]

After putting the frame together I've decided to add a center shelf, there is room to get all the things on the bench after getting it  to the point I could make more precise measurements.

[asmurff]

Bench is coming along nicely. I think I'm going to liquid nail the plywood to the shelf frames. Tomorrw I'll do that and start covering the back and sides.

[imschur]

very nice  :thumb:

[lmao_37]

Nice looking bench you have there  :thumb:

[techmike]

Outstanding, that will be great for reloading! :thumb:

[Microgunner]

That definitely looks like it'll do the job.  :thumb:

[asmurff]

Liquid nailed the top down today, decided to left the other 2 shelves loose, they aren't going anywhere and the weight of the things stored on them will hold them in place.

About then I ran out of steam (sucks slowing down), and the liquid nail need to dry.

[asmurff]

Well it is finally done, except for arranging things on it to work best. The hardest part was getting the 2 pegboard sheets to line up with each other.

[Madhouse]

Very cool smurf!

[imschur]

nicely done

[techmike]

Wow! That is NICE! Very well done. :thumb:

[Microgunner]

Pretty Smurffy.  :thumb: